Support
Shop
Disclaimer:
Please experiment and test these products separately prior to use on an
actual project and decide their suitability to your needs and specific
situations. Products sold by TrainAidsA are designed and created for
the convenience of hobbyists and modellers to assist them in their
pastime. TrainAidsA expects the items to perform as designed, but does
not guarantee performance as each user has different environments and
devices and products perform differently in different situations. Most
items will need experimentation and testing to enable the user to
decide the product's suitability.
In case of any accidental damage to, or by, any product sold by
TrainAidsA, TrainAidsA does not accept any liability other than
replacement of item supplied by TrainAidsA.
We may make changes to the products and design of the products sold by
TrainAidsA, including prices and descriptions, of any product listed
herein, at any time and from time to time without notice.
We reserve the sole right to either modify or discontinue the Site or
products listed on the Site, in whole or in part, including any
features therein, at any time and from time to time without notice.
This site could include technical or other mistakes, inaccuracies, or
typographical errors.
How-To-Guide: Motors
Graphical Demonstration of how a Fulgurex Motor works.
Graphics/Design - Courtesy: Club
Stavba
Order Now !!
Other Information:
Recommended Operating Voltage: 10 to 14 Volt DC. Operating Current:
approximately 200 mA when motor is running. Switch Current: 5 A
maximum. See our VR2
for a convenient method of converting voltage/power.
Control of the Fulgurex switch machine is via 10-14 V DC power to
the two terminals using polarity-reversal.
Two contacts sets are pre-installed. One set of contacts controls
motor actuator, while the extra contact set (one on each side) may be
used for
switching other devices. Additional contact sets available.
Back to Top
