TrainAidsA - Modelling accessories for the Creative Modeller

Shop



Disclaimer:
Please experiment and test these products separately prior to use on an actual project and decide their suitability to your needs and specific situations. Products sold by TrainAidsA are designed and created for the convenience of hobbyists and modellers to assist them in their pastime. TrainAidsA expects the items to perform as designed, but does not guarantee performance as each user has different environments and devices and products perform differently in different situations. Most items will need experimentation and testing to enable the user to decide the product's suitability. In case of any accidental damage to, or by, any product sold by TrainAidsA,
TrainAidsA does not accept any liability other than replacement of item made and supplied by TrainAidsA. This limited liability does not include any items by Marklin or RIbu Rietze or any other brand name items that we sell. We may make changes to the products and design of the products sold by TrainAidsA, including prices and descriptions, of any product listed herein, at any time and from time to time without notice. We reserve the sole right to either modify or discontinue the Site or products listed on the Site, in whole or in part, including any features therein, at any time and from time to time without notice. This site could include technical or other mistakes, inaccuracies, or typographical errors.


LED's

SMD | Bayonet, Cartridge & Screw Base | Strips | Connectors |


A Light Emitting Diode (LED) is now the preferred technology for illumination. LEDs consume less power, do not heat up and produce a stronger light while lasting much longer.

Most of our products are Plug-n-Play with the resistor integrated into the assembly. The individual C5 and SMD LEDs need voltage & current control. C5 packages include resistors for use with 9-19v DC.

For conversion from incandescent lamps/bulbs, we have introduced a variety of LEDs. E5 and C5 are designed to replace older bulbs. The Strips, which are also Plug-n-Play, use SMD type LEDs, the C5, E5, W5, W3's are glass dome type. Dome types produce a narrow directional forward illumination. SMD's produce a wider angle of illumination.

Explore, and as we say, experimentation is the first step to your dreams.

Be creative and submit your pictures and "how-you-did-it" notes for submission to the Gallery section. We welcome such submissions, information about interesting and creative uses our items have been put to, in modelling and model railroading.

Notes:

For AC & DCC users: To use our strips with AC power as in Märklin, or in situations where you would like them to light up in forward and backward movement (positive/negative polarity change), we suggest you feed the power via a rectifier to neutralize the flickering or polarity change.  ACW (see below) wire connector that has a built-in rectifier, is our suggestion. But you may also add a mini rectifier that can also be ordered via our Elektrizmos section.

Lionel Users: Please see items  E10, L2S, L1T & L3

Technical: Our LED Support section provides additional information on most of the items here. For Resistors, Rectifiers etc. please visit the Elektrizmos section.

LEDs with wires: LEDs are polarity sensitive. Wires presoldered with our LEDs, connectors etc., such as W3 or W5, follow this standard rule. Black wire is Negative (-) and  Colored wire is Positive (+).
Warm-White & White
Warm (or Golden) White & White (or Cool) White, LED Colors

Power Pickup for Cars:
An exact fit may not be available for many specific axle/wheel wiper installations. Axle/Wheel Wipers have been created by many modellers to suit their needs. Click Here for one suggestion for DC system users, based on modifying Märklin axle wipers that are available off-the-shelf from any Märklin dealer and also from our Märklin Section.

Notes on Shipping to US/Canada
Notes on Shipping Overseas
C5 - Cartridge Base
(Designed and produced by TrainAidsA)

Use as replacement in Locomotives, Turnouts, Vehicles, Trackside Accessories & other locations. 5mm dia. LEDs, without built in resistor. Similar mount as Marklin 600100 (5mm dia. base). Resistors supplied with LEDs and included in price.

For opposite polarity, see item CR5 below.

Normal use with 3-3.5v DC, and with upto 19v with resistor supplied.

Offers flexibility in installation with both polarities available as needed. See CR types for opposite/reversed polarity
C5=Normal Polarity: Center Bottom Terminal Positive & Casing Negative.
For opposite polarity, see item CR5 below.

Our Support section provides additional information.

C5 LEDs are Available in Packets of 2 Each in Following Clear Colors:

C5WH: White - Price: $1.50 per pkt.

C5AM: Amber - Price: $1.50 per pkt.

C5WW: Warm White - Price: $1.50 per pkt.

C5RD: Red - Price: $1.50 per pkt.

C5YE: Yellow - Price: $1.50 per pkt.

C5GR: Green - Price: $1.50 per pkt.


CR5 - Cartridge Base (Rev. Polarity)
(Designed and produced by TrainAidsA)

Same as C5, but with Reverse Polarity: Center Bottom Terminal is Negative & Casing Positive. Similar to Märklin 600100. Use as replacement in Locomotives, or where reverse polarity version of C5 is required. Comes without built in resistor similar to C5. Resistors supplied with LEDs and included in price.

For normal polarity, please see item C5 above.

CR5 LEDs are Available in Packets of 2 Each in Following Clear Colors:

CR5WH: White - Price: $1.50 per pkt.

CR5WW: Warm White - Price: $1.50 per pkt.

E5 - Screw Base
(Designed and produced by TrainAidsA)

Assembled with resistor in the body. Plug-n-Play - Use as replacement in Turnouts, Vehicles, Trackside Accessories & other locations. 5mm dia. LEDs, with built in resistor. Fits E5.5 (5.5mm dia.) sockets or other similar mounts.

Designed for use for 12v-19v.

Our Support section provides additional information.

E5 LEDs are Available in Packets of 2 Each in Following Clear Colors:

E5WH: White - Price: $1.50 per pkt.

E5AM: Amber - Price: $1.50 per pkt.

E5WW: Warm White - Price: $1.50 per pkt.

E5RD: Red - Price: $1.50 per pkt.

E5YE: Yellow - Price: $1.50 per pkt.

E5GR: Green - Price: $1.50 per pkt.



Physical Comparison of L1T, E5 and E10 LED Sizes:

For more details, see: Large LEDs Support
Comparison of LED Sizes: L1T (Left), E5 (Center) and E10 (Right)
E5 (center) have a base of 5.5mm diameter and E10 (right) have a base of 10mm diameter.

Note: These are not sold as a pack of 3. This picture is just to demonstrate the difference in sizes of the three types.
Click Picture for a larger view .

Select for use:
With Dome or without.

Selection of LEDs for Lionel Switch etc.
Click Picture for a larger view .

E10 LEDsE10 Dome LEDs
(Designed and produced by TrainAidsA)


For more details, see: E10 LEDs Support

Dimensions:
Bottom Tip to Top: 28mm ( 1-1/8 inch)
Base Diameter: 9mm ( 5/16 inch ) E10 Base

Use much less power and stay cool to touch !
No more melted switch covers. You don't need the covers. The dome shape has the same look as the covers. Remove the old covers and bulbs and Just Screw these in !!!!!

Resistor built inside. Rectifier inside for compatibility to work with opposite polarity or AC.

E10 Dome LEDs are Available in Packets of 2 Each in Following Colors:
E10-WH: White (Milky/Frosted) - Price: $2.50 per pkt. 


E10-RD: Red (Clear) - Price: $2.50 per pkt.

E10-GR: Green (Clear) - Price: $2.50 per pkt.
L_Logo-lg
Ideal Replacement for Incandescent Bulbs/Lamps in
Older Lionel Switches and Controllers (e.g. 0-22 & 5133)
Fit Bulb Sockets: 52, 258, 428, 432, 1446, 1447 & 1449
and other locations where the same base can fit.


L2S Screw Mount Flat Top LEDs L2S Flat Top LEDs
(Designed and produced by TrainAidsA)

For more details, see: L2S LEDs Support

Dimensions:
Bottom Tip to Top: 25mm ( 15/16 inch)
Base Diameter: 9mm ( 5/16 inch ) E10 Base

No more melted switch covers. Just Plug in !!!!! Use much less power and stay cool to touch !

Resistor built inside. Rectifier inside for compatibility to work with opposite polarity or AC.

L2S Flat Top LEDs are Available in Packets of 2 Each in Following Colors:
L2S-WH: White (Milky/Frosted) - Price: $2.50 per pkt. 


L2S-RD: Red (Clear) - Price: $2.50 per pkt.

L2S-GR: Green (Clear) - Price: $2.50 per pkt.
L_Logo-lg
Ideal Replacement for Bulbs/Lamps in
Lionel Switches & Controllers (e.g. 0-22 & 5133) with
Screw Mounts for use with Dome shaped Covers
or Loco/Passenger car lights.
Fit Bulb Sockets: 52, 258, 428, 432, 1446, 1447 & 1449


L1T Screw Mount Flat Top LEDs L1T Flat Top LEDs
(Designed and produced by TrainAidsA)

For more details, see: L1T LEDs Support

Dimensions:
Bottom Tip to Top: 25mm ( 15/16 inch)
Base Diameter: 9mm ( 5/16 inch ) BA9S Base

Use much less power and stay cool to touch ! No more melted switch covers. Just Plug in !!!!!

Resistor built inside. Rectifier inside for compatibility to work with opposite polarity or AC.

L1T Flat Top LEDs are Available in Packets of 2 Each in Following Colors:
L1T-WH: White (Milky/Frosted) - Price: $2.50 per pkt. 


L1T-RD: Red (Clear) - Price: $2.50 per pkt.

L1T-GR: Green (Clear) - Price: $2.50 per pkt.
L_Logo-lg
Ideal Replacement for Bulbs/Lamps in
Lionel Switches & Controllers (e.g. 0-22 & 5133) with
Bayonet Mounts for use with Dome shaped Covers.
Fit Bulb Sockets: 53, 57, 182, 257, 363, 1445 & 6253


Wired SMD LEDs L3 Round Dome Top LEDs
(Designed and produced by TrainAidsA)

Note: The length is longer than traditional bulbs due to the shape & size of the LED. For more details, see: L3 LEDs Support

Dimensions:
Bottom Tip to Top: 28mm ( 1-1/8 inch )
Base Diameter: 9mm ( 5/16 inch ) BA9S Base

Use much less power and stay cool to touch !
No more melted switch covers. You don't need the covers. The dome shape has the same look as the covers. Remove the old covers and bulbs and Just Plug in !!!!!

Resistor built inside. Rectifier inside for compatibility to work with opposite polarity or AC.

L3 Dome LEDs are Available in Packets of 2 Each in Following Colors:
L3-WH: White (Milky/Frosted) - Price: $2.50 per pkt.


L3-RD: Red (Clear) - Price: $2.50 per pkt.

L3-GR: Green (Clear) - Price: $2.50 per pkt.
L_Logo-lg
Ideal Replacement for Bulbs/Lamps in
Lionel Switches & Controllers (e.g. 0-22 & 5133) with
Bayonet Mounts for use with Dome Covers/Lenses.
Fit Bulb Sockets: 53, 57, 182, 257, 363, 1445 & 6253


W3 - 3mm Round Dome Top
(Designed and produced by TrainAidsA)

LED Wired with Resistor. Plug-n-Play - ready to use in buildings, in lamp posts, as signal lamps, in turnouts, inside vehicles, trackside, tunnels & other creative locations. 3 mm dia.



Power: 12v DC to 19v DC | Max. Forward Current: 60mA (Reduce if possible for voltage above 12v) | Max, Normal Current: 40mA | Max. Reverse Voltage: 10v.

Our Support section provides additional information.

W3 LEDs are Available in Packets of 2 Each in Following Clear Colors:

W3WH: White - Price: $1.50 per pkt.
W3AM: Amber - Price: $1.50 per pkt.
W3WW: Warm White - Price: $1.50 per pkt.
W3RD: Red - Price: $1.50 per pkt.
W3YE: Yellow - Price: $1.50 per pkt.
W3GR: Green - Price: $1.50 per pkt.

W3 LEDs are also Available in Packets of 2 Each in Following Milky Color(s):
W3WH-M: Milky White - Price: $2.00 per pkt.          

W3WW-M: Milky Warm White - Price: $2.00 per pkt.


W5 - 5mm Round Dome Top
(Designed and produced by TrainAidsA)

LED Wired with Resistor. Plug-n-Play - ready to use in buildings, vehicles, trackside & other creative locations. 5mm dia. Each with built in resistor & 20 cm wire leads ready to connect to 12v-19v DC.

Power: 12v-19v DC | Max. Forward Current: 60mA (Reduce if possible for voltage above 12v) | Max, Normal Current: 40mA | Max. Reverse Voltage: 10v.


Our Support section provides additional information.

W5 LEDs are Available in Packets of 2 Each in Following Clear Colors:

W5WH: White - Price: $1.50 per pkt.

W5AM: Amber - Price: $1.50 per pkt.

W5WW: Warm White - Price: $1.50 per pkt.

W5RD: Red - Price: $1.50 per pkt.

W5YE: Yellow - Price: $1.50 per pkt.

W5GR: Green - Price: $1.50 per pkt.

Wired SMD LEDs SMD-3528 LEDs
(Designed and produced by TrainAidsA)

SMD (Surface Mount) LEDs individually prepared for your convenience with 18in. (50cm) long wire leads pre-soldered to each.

As they have a wider angle of illumination, they are great for installation in a variety of locations in your layout, cars, stations, inside buildings, behind windows or in signals. Long wire leads allow wiring through the baseboard without any joints to worry about.


Save on soldering time and trouble!.
(Other models being introduced shortly.)

Voltage requirement varies from 1.9 to 3+ Volts depending on the color. SMD Type 3528, please check out our Support section for diemnsions.

SMD LEDs are Available in Packets of 2 Each in Following Clear Colors:
SMD3528-WH: White - Price: $2.00 per pkt.


SMD3528-WW: Warm White - Price: $2.00 per pkt.

SMD3528-YE: Yellow - Price: $2.00 per pkt.

S5 - 5v Lighting Strip
(Designed and produced by TrainAidsA)

5v version of our S12 SMD Lighting Strip (below) for passenger cars. "Plug-n-Play" for use with 3-6v DC.

Provides full strength illumination at 5-6v. Lower intensity at 3-4.9v. For 6v to 19v, we suggest using S12 strips. Dimensions and other characteristics, same as S12 (see below). Connector wire 10cm/4 in. long. Works with AC, but can also be used with a rectifier, built into the ACW (below) connector wire.

Our Support section provides additional information including their connectivity options for all strips, SMD Type etc.

S5 SMD LED Strips are Available Singly in Following LED Colors:
S5WH: White - Price: $3.50 Each


S5WW: Warm White - Price: $3.50 Each

S5YE: Yellow - Price: $3.50 Each

S12 - 12v Lighting Strip (Previously Item S-10)
(Designed and produced by TrainAidsA)

SMD Lighting Strip for passenger cars. "Plug-n-Play" for use with 6v-19v DC and will work without any additional circuitry.


Lower than 12v will deliver slightly lower intensity of illumination. Reduce current for voltages higher than 18v for use upto 27v. by adding our 5R180 Resistor. See these in our "Elektrizmos" Section.

Used as is, in Marklin AC, and by our customers with DC/DCC as well. However, many prefer to use with ACW (see below). Our wire connector that has a built in mini-rectifier. That converts the power to DC. Connect two strips for longer passenger cars. Connect more for other uses such as background lighting, long stretches as platform lighting or illumination undel the layout table.
Strips can also be cut in half for adjustment to total length required or for shorter lengths for example for a Caboose/Guard Van. Half the strip (5cm/2 in.) will work just as normally as a complete one. Visit our Gallery section for ideas.

Our Support section provides additional information including their connectivity options, SMD Type etc.

Please also see the longer version - S50 - below.

Picture shows two strips with two connector wires included. Sold singly with wire leads and connectors.
Length: 10cm / 4 in ( 10.75 incl. connectors). Width: 8mm (0.32 in). Designed Power: 12v (See our Notes). Max. Forward Current: 60mA (Reduce for voltages higher than 12v) | Max. Normal Current: 40mA | Max. Reverse Voltage: 10v

S12 SMD LED Strips are Available Singly in Following LED Colors:
S12WH: White - Price: $3.50 Each


S12WW: Warm White - Price: $3.50 Each

S12YE: Yellow - Price: $3.50 Each

S12K - 12v Lighting Strip Kit
S12 Lighting Strip Kit for passenger cars. As a Kit, it offers additional flexibility in installation.
Use Rectifier/s to Connect to a 12v AC feed.
Or:
Use Diodes to block incorrect polarity feed in a dual strip installation. Do work with voltages from 9v to 18v. Lower than 12v will deliver lower intensity of illumination. Reduce current at higher voltages than 12v. One strip to operate when power is of one polarity. The other for reverse polarity.
Strips can also be cut in half for shorter lengths for example for a Caboose. Half the strip (5cm/2 in.) will work just as normally as the complete one. Visit our Gallery section for ideas.

Our Support section provides additional information including their connectivity options and other tips, including SMD Type etc..

Each item/kit ordered contains:
2 Pcs: S12 (10cm) 12v SMD LED Strips
2 Pcs: R1 Mini Rectfiers for AC
2 Pcs: 1N4148 Diodes
2 Pcs: Wire with Connectors

S12 SMD LED Strip Kits are Available in Following LED Colors:
S12KWH: White - Price: $11.00 Each


S12KWW: Warm White - Price: $11.00 Each

S12KYE: Yellow - Price: $11.00 Each


S50 SMD LED 50cm. Long Lighting Strip
Same as S12, but Long Length SMD Lighting Strip. Has different connectors. Cuttable, Plug-n-Play designed for use with 12v DC and will work without any additional circuitry. Do work with voltages from 9v up to 18v. Lower than 12v will deliver lower intensity of illumination. Reduce current for voltages higher than 12v. Use these to light station platforms, inside buildings etc. Cut pieces operate as independent strips, still Plug-n-Play.
Length: 50cm / 19 in | Width: 8mm (0.32 in) | Power: 12v | Max. Forward Current: 60mA | Max. Normal Current: 40mA | Max. Reverse Voltage: 10v. Uses SMD Type 3528.

Shipping Note: Shipping of this item mey not be combined with other items, due to its size and shape, but shipping calculation includes shipping for this item.

S50 SMD LED Strips are Available Singly in Following LED Colors:
S50WH: White - Price: $15.00 Each


S50WW: Warm White - Price: $15.00 Each

S50YE: Yellow - Price: $15.00 Each

S50BL: Blue - Price: $15.00 Each

S50RD: Red - Price: $15.00 Each

Fx - 12v Flexible Lighting Strip
Designed for 12vDC. Does work with voltages from 9v up to 18v. Power supply lower than 12v will deliver lower intensity of illumination. (Cut to Length as needed. Similar to S50). Power: As in S50 (Our Support section provides additional information).

Installation:
Comes with Adhesive Backing
Maximum Continuous Length Available in one piece: 5 Mtrs (Approx 5 yds.) | Width: 8mm (0.32 in) | Cuttable in 2 inch / 5cm lengths only. SMD Type 3528.

Flexible SMD LED Strips are Available in Following LED Colors
(Each 2in/5cm length is counted as one item)

FXWH: White - Price: $2.00 per item

FXWW: Warm White - $2.00 per item

FXYE: Yellow - Price: $2.00 per item
FXBL: Blue - Price: $2.00 per item

ACW - Strip Wire Connector with Rectifier
(Designed and produced by TrainAidsA)

Wire Connectors for S12/S5 Lighting Strips, with in-line Rectifier. Use with S12/S5 Lighting Strips directly. Colored wire is positive. Only one needed if two or more strips connected or powered from the same feed. Highly recommended for digital systems.


Our Support section provides additional information on where and how to use ACW.
For individual rectifiers, see our "Elektrizmos" section.

ACW - Strip Wire Connector with Rectifier is Available Singly
ACW - Price: $1.00 Each


10 cm Strip End Connectors
Pair of End Connectors for S12/S5 Lighting Strips. Solder connectors to shorter pieces of S12, S5 or S50 and make them connectable. Use with Lighting Strips or where needed. Good as wire connectors too. Sold in pairs as shown.

Strip End Connectors are Available as Pairs
Connectors - Price: $0.75 per pair.



Please join our Mailing List::

Name:
Email: 



Back to Top


Copyright © 2008-2009. TrainAidsA.com